Personnel de l'université
Bertrand GARNIER
Chargé de recherche CNRS HEBCoordonnées
- Bureau
- Bâtiment Isitem, bureau R122,
- Tél
- 0240683114 (n° interne : 483114)
- Bertrand.Garnier@univ-nantes.fr
Discipline(s) enseignée(s)
- Physic of Heat Transfer ( ED SIS, Master Recherche TE)
- Métrologie thermique par cntact et radiatif ( dept TEM, MDE
- Rayonnement et Métrologie thermique (TP) (Dept TEM, MDE)
- Métrologie thermique par cntact et radiatif ( dept TEM, MDE
- Rayonnement et Métrologie thermique (TP) (Dept TEM, MDE)
Thèmes de recherche
Mes activités de recherche porte sur les transferts de chaleur aux interfaces et dans les microsystèmes. Des bancs d’essais originaux équipés de capteurs température ou de flux de chaleur de type couche mince ou réalisé par sérigraphie sont développés pour caractériser thermiquement des matériaux sous forme de films ou de fibres (AlN, Alq3, caoutchouc naturel sous étirement, fibres de carbone, carbone expansé…) ou pour caractériser les températures et paramètres thermiques d’interface outil/pièce lors des procédés d’usinage. Par ailleurs des modèles thermiques analytiques multicouches, transitoires sont mis au point pour estimer des grandeurs telles que la conductivité thermique (transverse et dans le plan), les résistances thermiques de contact, le flux de chaleur généré et le coefficient de partage associé… Les méthodes utilisées sont de type stationnaire, plan chaud, 3 oméga, méthode en T, Levenberg-Marquardt pour l’estimation de paramètres, spécification de fonction pour l’estimation de flux de chaleur et de température en surface. Les domaines abordés sont les transferts de chaleur dans les matériaux composites, dans les couches minces (éléctronique) l’éclairage avec les Oleds, l’étude des microréacteurs ou de la thermique de l’usinage (tournage, rectification), les capteurs de distribution de flux de chaleur dans le solaire concentré, les capteurs flux métriques pour la thermique du bâtiment, les capteurs pour le suivi de la croissance de biofouling.
Activités / CV
Parcours:
- 1991 – 2025 : Chargé de recherche CNRS (Hdr en 2003)
-1991à 2001 : Equipe de recherche «Thermique des Matériaux et des Procéds de mise en forme »
-2002 à 2007 : Equipe de Recherche «Thermique des interfaces et des microsystèmes»
-2007à maintenant : Equipe de Recherche «Transfert Thermique dans les Matériaux et aux Interfaces »
-2002 à 2007 : Equipe de Recherche «Thermique des interfaces et des microsystèmes»
-2007à maintenant : Equipe de Recherche «Transfert Thermique dans les Matériaux et aux Interfaces »
- 1990-1991 : Séjour post-doctoral de 2 ans au “Heat Transfer Laboratory” de Pr. J.V. Beck , Michigan State University USA
- 1986-1990 : Thèse Nantes-Université 18/05/1990 sélectionné prix ATLANTHESE 1990, « Couplage entre transfert de chaleur et réaction chimique pendant le procédé de vulcanisation» Jury : D. Delaunay, J.P. Bardon, J. Bransier (rap.), A.Degiovanni (rap.), F. Danes, M.Pompei, J.V. Beck
- Dir.-Adjoint Lab. de Thermocinétique UMR CNRS 6607- DU Pr.H Peerhossaini, 2002-2007
- Membre du Conseil Pédagogique et Scientifique de l’Ecole Doctorale MTGC 1999-2005
- Membre du bureau CNU section 62 (2010-2015 présid. L Tadrist )
- Membre du Comité National section 12 (2021-2023 présid. S. Popinet)
- Coordinateur de plusieurs projets exploratoires : CAPINOV 2008, NPTIO2 2013, DIFUSE 2017
- Coordinateur du PR MIEMUF 2009-Prg Energie du CNRS -avec le LGC Toulo., ESPCI Paris, LEMTA Nancy
- Resp. scientif. partenaire LTeN de l’ANR ECPOR “Elastocaloric Coupling in Polymers for Solid State Refrigeration” 2018-2022 parten. CETHIL, LGEF (INSA Lyon), Elytmax Japon
- Coordinateur de l’ANR MGIMS 2024-2028 “Mastering Machining using Microsensors” avec les partenaires LEM3 –ENIM Metz, FEMTO-ST Besancon & Belfort et IMN Nantes
Informations complémentaires
Publications dans des Revues scientifiques (2015- 2025) :
KARKRI M., IBOS L., GARNIER B., Comparison of experimental and simulated effective thermal conductivity of polymer matrix filled with metallic spheres: thermal contact resistance and particle size effect, J Composite Materials,vol. 49 no. 24 3017-3030 2015
REISDORFFER F., GARNIER B., LE RENDU P., NGUYEN T.P., Use of an OLED as a thermal source to supply integrated organic Peltier unit, Applied Thermal Eng.76, 530-534 2015
MOUSSA T., DELLAVALLE D., GARNIER B., PEERHOSSAINI H., Numerical and Experimental Hydrodynamic Study of a Coolant Distributor for Grinding Applications, Engineering Applications of Computational Fluid Mechanics, 10(1)86-99 Nov 2015 DOI10.1080/19942060.2015.1102170.
HADDADI M.; BOUDJEMAA A.L, BENMANSOUR N.; BOUDENNEA.; GARNIER B. Experimental and modeling study of effective thermal conductivity of polymer filled with date palm fibers, Polymer Composites, p. 1-8, July 2015-DOI 10.1002/pc23741
BOUDENNE, A., MAMUNYA Y., VOLODYMYR LEVCHENKO V., GARNIER B., LEBEDEV E., Improvement of thermal and electrical properties of Silicone–Ni composites using magnetic field, European Polymer Journal, Vol. 63, February 2015, p.11-19
LAHMAR, A.; ASSAF, A.; DURAND, M.J.; JOUANNEAU, S.; THOUAND, G.; GARNIER, B., Factors Influencing Adhesion of Submicrometer Thin Metal Films: A Critical Review, Reviews of Adhesion and Adhesives, Volume 4, Number 1, March 2016, pp. 47-68(22)
GARNIER B., BOUDENNE A. Use of hollow metallic particles for the thermal conductivity enhancement and lightening of filled polymer Eurofillers Polymer Blend'15 Polymer Degradation and Stability, Volume 127, p. 113-118, May 2016
KADA D., KOUBAA A., TABAK G., MIGNEAULT S.,GARNIER B., BOUDENNE A, Tensile properties, thermal conductivity and thermal stability of Short Carbon Fiber Reinforced Polypropylene Composites, Polymer Composites, p. 1-7, June 2016, DOI: 10.1002/pc.24093
MOUSSA T., GARNIER B., PELAY U., FAVENNEC Y., PEERHOSSAINI H. Heat transfer analysis at the interface between glass plate and sintered diamond wheel during the grinding process, Int .J.Thermal Science, Volume 107, September 2016, pp. 89-95 (2016)
MOUSSA T., GARNIER B., PEERHOSSAINI H. Experimental measurement and numerical analysis of grinding temperature by new foil/workpiece thermocouple technique, Measurement Science and Technology, Vol.28, 6, p. 1-8, 2017
MISHRA K., GARNIER B., LE CORRE S., BOYARD N., Accurate measurement of the longitudinal thermal conductivity and volumetric heat capacity of single carbon fibers with the 3ωmethod J Therm Anal Calorim 139, p.1037–1047(2020)DOI 10.1007/s10973-019-08568-z
BELKERK B.E., J. CAMUS, B. GARNIER, H. AL BRITHEN, S. SAHLI, ET AL.. Measuring anisotropic thermal conductivity of aluminum nitride films with the ultra-fast hot strip technique. International Journal of Thermal Sciences, Elsevier, 2020, 151, pp.106259. 10.1016/j.ijthermalsci.2019.106259. hal-02507940
SANDHYA P., SREEKALA M., BOUDENNE A., GARNIER B., ROUXEL D., MOOTHETTY PADMANABHAN, NANDAKUMAR KALARIKKAL; SABU THOMAS , Thermal and electrical properties of phenol formaldehyde foams reinforcing with reduced graphene oxide,Polymer Composites Volume41, Issue10,pp. 4329-4339, October 2020
RODRIGUEZ F., Nicolas DELPOUVE, Adèle LAURENT, Bertrand GARNIER, Jean-Luc DUVAIL, and Eléna ISHOW, Exploiting light interferences to generate micrometer‐high superstructures from monomeric azomaterials with extensive orientational mobility, Advanced Optical Materials, Wiley, 2021, pp.2100525. ⟨10.1002/adom.202100525⟩
OLAYA –GOMES R., GARNIER B., Radial thermal conductivity of a PAN type carbon fiber using the 3omega method, International Journal of Thermal Sciences Volume 172, Part A, February 2022, 107321 https://doi.org/10.1016/j.ijthermalsci.2021.107321
MAKSASSI Z., GARNIER B., OULD EL MOCTAR A., SCHOEFS F. and SCHAEFFER E, Thermal Characterization and Thermal Effect Assessment of Biofouling around a Dynamic Submarine Electrical Cable, Energies 2022, 15, 3087. pp. 1-18, https://doi.org/10.3390/en15093087
OLAYA RODRIGO, BERTRAND GARNIER,Thermal contact resistance measurement between two intersecting PAN type carbon fibers using the T-type 3ω method, International Journal of Thermal Sciences,Volume 193, 2023,108510, https://doi.org/10.1016/j.ijthermalsci.2023.108510
MAKSASSI Z., Ahmed Ould EL Moctar, Bertrand Garnier, Franck Schoefs, Emmanuel Schaeffer, For better comprehension of mussel’s thermal characteristics and their thermal effect on dynamic submarine electrical cables, Applied Ocean Research 144 (2024), 03900,https://doi.org/10.1016/j.apor.2024.103900
BELKERK B. E., Amine Achour, Bertrand Garnier and Mohamed-Abdou Djouadi, Novel Ultrafast Transient Hot-Bridge Technique for Thermal Properties Measurement of Dielectric Thin Films, IEEE Transactions on Instrumentation and Measurement, pp.1-1. ⟨10.1109/TIM.2024.3470224⟩. 2024.
POPINET S. (président), Tatiana Itina (secrétaire scientifique), Bertrand Cinquin, Catherine Colin, Laurent Cordier, Estelle Couallier, Virginie Daru, Nadia El-Kissi, Jean-Marie Félio, Guillaume Galliero, Roger Garcia, Bertrand Garnier (2021-2023), Irina Graur, Eva Kovacevic, Alexandre Labergue, Frédéric Lefèvre, Christophe Ménézo, Jérôme Morchain, Karim Ouaras (2024-), Laure Pillier, Laurent Selle (2023-), Annemie Van Hirtum Rapport de Conjoncture 2021-2025 : coCNRS Section 10 : Milieux fluides et réactifs : transports, transferts, procédés de transformation. 2024. hal-04794711
ZERNADJI R., B. E. Belkerk, B. Riah, A. Ayad, M. Rammal, J. Camus, B. Garnier and M.A. Djouadi., Thermal conductivity of AlN thin films deposited by reactive DC magnetron sputtering on different substrates using ultra-fast transient hot strip technique, Applied Physics letters (Vol.126, Issue 2) 2025DOI: 10.1063/5.0244583
KARKRI M., IBOS L., GARNIER B., Comparison of experimental and simulated effective thermal conductivity of polymer matrix filled with metallic spheres: thermal contact resistance and particle size effect, J Composite Materials,vol. 49 no. 24 3017-3030 2015
REISDORFFER F., GARNIER B., LE RENDU P., NGUYEN T.P., Use of an OLED as a thermal source to supply integrated organic Peltier unit, Applied Thermal Eng.76, 530-534 2015
MOUSSA T., DELLAVALLE D., GARNIER B., PEERHOSSAINI H., Numerical and Experimental Hydrodynamic Study of a Coolant Distributor for Grinding Applications, Engineering Applications of Computational Fluid Mechanics, 10(1)86-99 Nov 2015 DOI10.1080/19942060.2015.1102170.
HADDADI M.; BOUDJEMAA A.L, BENMANSOUR N.; BOUDENNEA.; GARNIER B. Experimental and modeling study of effective thermal conductivity of polymer filled with date palm fibers, Polymer Composites, p. 1-8, July 2015-DOI 10.1002/pc23741
BOUDENNE, A., MAMUNYA Y., VOLODYMYR LEVCHENKO V., GARNIER B., LEBEDEV E., Improvement of thermal and electrical properties of Silicone–Ni composites using magnetic field, European Polymer Journal, Vol. 63, February 2015, p.11-19
LAHMAR, A.; ASSAF, A.; DURAND, M.J.; JOUANNEAU, S.; THOUAND, G.; GARNIER, B., Factors Influencing Adhesion of Submicrometer Thin Metal Films: A Critical Review, Reviews of Adhesion and Adhesives, Volume 4, Number 1, March 2016, pp. 47-68(22)
GARNIER B., BOUDENNE A. Use of hollow metallic particles for the thermal conductivity enhancement and lightening of filled polymer Eurofillers Polymer Blend'15 Polymer Degradation and Stability, Volume 127, p. 113-118, May 2016
KADA D., KOUBAA A., TABAK G., MIGNEAULT S.,GARNIER B., BOUDENNE A, Tensile properties, thermal conductivity and thermal stability of Short Carbon Fiber Reinforced Polypropylene Composites, Polymer Composites, p. 1-7, June 2016, DOI: 10.1002/pc.24093
MOUSSA T., GARNIER B., PELAY U., FAVENNEC Y., PEERHOSSAINI H. Heat transfer analysis at the interface between glass plate and sintered diamond wheel during the grinding process, Int .J.Thermal Science, Volume 107, September 2016, pp. 89-95 (2016)
MOUSSA T., GARNIER B., PEERHOSSAINI H. Experimental measurement and numerical analysis of grinding temperature by new foil/workpiece thermocouple technique, Measurement Science and Technology, Vol.28, 6, p. 1-8, 2017
MISHRA K., GARNIER B., LE CORRE S., BOYARD N., Accurate measurement of the longitudinal thermal conductivity and volumetric heat capacity of single carbon fibers with the 3ωmethod J Therm Anal Calorim 139, p.1037–1047(2020)DOI 10.1007/s10973-019-08568-z
BELKERK B.E., J. CAMUS, B. GARNIER, H. AL BRITHEN, S. SAHLI, ET AL.. Measuring anisotropic thermal conductivity of aluminum nitride films with the ultra-fast hot strip technique. International Journal of Thermal Sciences, Elsevier, 2020, 151, pp.106259. 10.1016/j.ijthermalsci.2019.106259. hal-02507940
SANDHYA P., SREEKALA M., BOUDENNE A., GARNIER B., ROUXEL D., MOOTHETTY PADMANABHAN, NANDAKUMAR KALARIKKAL; SABU THOMAS , Thermal and electrical properties of phenol formaldehyde foams reinforcing with reduced graphene oxide,Polymer Composites Volume41, Issue10,pp. 4329-4339, October 2020
RODRIGUEZ F., Nicolas DELPOUVE, Adèle LAURENT, Bertrand GARNIER, Jean-Luc DUVAIL, and Eléna ISHOW, Exploiting light interferences to generate micrometer‐high superstructures from monomeric azomaterials with extensive orientational mobility, Advanced Optical Materials, Wiley, 2021, pp.2100525. ⟨10.1002/adom.202100525⟩
OLAYA –GOMES R., GARNIER B., Radial thermal conductivity of a PAN type carbon fiber using the 3omega method, International Journal of Thermal Sciences Volume 172, Part A, February 2022, 107321 https://doi.org/10.1016/j.ijthermalsci.2021.107321
MAKSASSI Z., GARNIER B., OULD EL MOCTAR A., SCHOEFS F. and SCHAEFFER E, Thermal Characterization and Thermal Effect Assessment of Biofouling around a Dynamic Submarine Electrical Cable, Energies 2022, 15, 3087. pp. 1-18, https://doi.org/10.3390/en15093087
OLAYA RODRIGO, BERTRAND GARNIER,Thermal contact resistance measurement between two intersecting PAN type carbon fibers using the T-type 3ω method, International Journal of Thermal Sciences,Volume 193, 2023,108510, https://doi.org/10.1016/j.ijthermalsci.2023.108510
MAKSASSI Z., Ahmed Ould EL Moctar, Bertrand Garnier, Franck Schoefs, Emmanuel Schaeffer, For better comprehension of mussel’s thermal characteristics and their thermal effect on dynamic submarine electrical cables, Applied Ocean Research 144 (2024), 03900,https://doi.org/10.1016/j.apor.2024.103900
BELKERK B. E., Amine Achour, Bertrand Garnier and Mohamed-Abdou Djouadi, Novel Ultrafast Transient Hot-Bridge Technique for Thermal Properties Measurement of Dielectric Thin Films, IEEE Transactions on Instrumentation and Measurement, pp.1-1. ⟨10.1109/TIM.2024.3470224⟩. 2024.
POPINET S. (président), Tatiana Itina (secrétaire scientifique), Bertrand Cinquin, Catherine Colin, Laurent Cordier, Estelle Couallier, Virginie Daru, Nadia El-Kissi, Jean-Marie Félio, Guillaume Galliero, Roger Garcia, Bertrand Garnier (2021-2023), Irina Graur, Eva Kovacevic, Alexandre Labergue, Frédéric Lefèvre, Christophe Ménézo, Jérôme Morchain, Karim Ouaras (2024-), Laure Pillier, Laurent Selle (2023-), Annemie Van Hirtum Rapport de Conjoncture 2021-2025 : coCNRS Section 10 : Milieux fluides et réactifs : transports, transferts, procédés de transformation. 2024. hal-04794711
ZERNADJI R., B. E. Belkerk, B. Riah, A. Ayad, M. Rammal, J. Camus, B. Garnier and M.A. Djouadi., Thermal conductivity of AlN thin films deposited by reactive DC magnetron sputtering on different substrates using ultra-fast transient hot strip technique, Applied Physics letters (Vol.126, Issue 2) 2025DOI: 10.1063/5.0244583
Mis à jour le 10 avril 2026.